S535 Wafer Acceptance Test System Administrative Guide
Section 2: S535 site preparation and installation
S535-924-01 Rev. B / January 2019
2-19
Power and operating conditions
The following topics contain information about power and operating environment conditions.
Supplied power cords
Keithley Instruments provides power cords that match the power requirements of the system. The
following figure and table describe these cords.
Figure 24: Supplied power cables
Number
Description
1
20 A, 125 V American
2
15 A, 125 V American
3
16 A, 250 V Eurostyle cord
If power cords with different cord ends are needed, you must provide those cords.
