Keithley KPXI Скачать руководство пользователя | Manualshive

Страница: 43 / 97

background image

KPXI-CON-900-01 Rev. A / January 2007

Return to

4-3

KPXI System Controller User’s Manual

Section 4: Driver Installation

Installing hardware configuration file

Follow the instructions below to install the hardware configuration file on a Windows XP/2000
system.

NOTE

Record the location of the Windows XP/2000 directory before installing the drivers.

Step 1:

Check the System Requirements. Windows XP/2000 must be fully installed and running
on the system prior to running this software.

Step 2:

Close any running applications.

Step 3:

The files are stored in an integrated Windows XP/2000 application setup program.

Step 4:

Insert the Keithley Instruments CD, run the infinst_enu.exe file at

X:\Driver Installation

\PXI controller

\chipset\Win2kXP\ (where X is the CD-ROM drive).

Step 5:

Click

Next

on the Welcome Screen to read and agree to the license agreement. Click

Yes

if you agree to continue. NOTE: If you click No, the program will terminate.

Step 6:

Click

Next

on the Readme Information screen to install INF files.

Step 7:

Click

Finish

to restart the system when prompted.

Step 8:

Follow the screen instructions and use default settings to complete setup when Windows
XP/2000 restarts. Upon restart, Windows may display a dialog box announcing new
hardware has been found and installs drivers for them. If a New Hardware Found dialog
box is displayed requesting the location of the drivers, click on the scrollbar and select the
Windows directory.

Step 9:

Select

Yes

, when prompted to restart Windows.

VGA driver installation

This section describes the VGA driver installation for the onboard VGA controller Intel® 855E
GMCH2. The relative drivers are located in X:\Driver Installation\PXI Platform\

\PXI controller

\VGA\

of the Keithley Instruments CD, where X: is the drive letter of the CD-ROM drive.

Windows 2000 and Windows XP may try to install the standard VGA driver. To ensure
compatibility, manually install the latest driver, which is included in the Keithley Instruments CD. To
update to the new driver, follow the steps below:

Step 1:

Boot Windows and execute the win2k_xp149.exe file under this directory:

X:\Driver Installation

\PXI controller

\VGA\Win2kXP

Step 2:

Follow the prompts. The VGA driver will automatically be installed onto the system.

Step 3:

Restart the system.

Troubleshooting VGA driver installation

After installing the VGA/AGP drivers in Windows, it is possible to find the drivers not working
correctly. This may be caused by failing to install the Windows service pack beforehand. Ensure
that the Windows service pack is installed to enable AGP capability.

LAN driver installation

This section describes the LAN driver installation for the onboard Intel® 82545EM Gigabit Ethernet
controller. The drivers included in the Keithley Instruments CD support Windows XP/2000.

«
...
41
42
43
44
45
...
»

Содержание KPXI


































































































Отзывы:

Нет отзывов

Похожие инструкции для KPXI

Бренд: Zolix Instruments Страницы: 22

Бренд: K1EL Страницы: 46

Бренд: Yamaha Страницы: 92

Бренд: Jetter Страницы: 24

Simply Smart PY75 A Series

Бренд: BABYTREND Страницы: 32

CentralControl CC41

Бренд: Becker Страницы: 48

Бренд: GSK Страницы: 32

Бренд: TWR Lighting Страницы: 49

Бренд: Conel Страницы: 52

Бренд: Revox Страницы: 57

Бренд: Wittenstein Страницы: 52

Бренд: GEM Страницы: 31

SYNCHRO QUASAR AC

Бренд: UCS Страницы: 10

MultiMode 1214-8

Бренд: Curtis Страницы: 41

Chromoflex Pro Series

Бренд: Barthelme Страницы: 6

Бренд: Tate Страницы: 32

Бренд: Danfoss Страницы: 14

Бренд: Jetter Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды