Model DMM7512 7½ Digit Sampling Multimeter Instrument Information
8
071357601 / October 2018
Set the IP address to be set automatically
When the TCP/IP configuration mode is set to Automatic, a DHCP server automatically sets the IP address,
subnet mask, and the default gateway. To use this option, a DHCP server must be available on the network.
The following steps reset the TCP/IP configuration, which also resets the instrument password. This
allows remote access to LXI web page controls that may have been password-protected before the
reset.
To use the LAN RESET switch to select Automatic configuration:
1. Turn on instrument power.
2. Wait for the instrument to complete power up.
3. Insert a straightened paper clip into the recessed LAN RESET switch on the DMM7512 front panel,
pressing the switch briefly. The LAN status indicator illuminates when the connection is established.
4. To find the IP address that was automatically applied, use the LXI Discovery Tool, a utility that is available
from the Resources tab of the
