Section 2: Using the front-panel interface
Models 707B and 708B 199BSwitching Matrix User's Manual
2-12
707B-900-01 Rev. B / June 2013
Exercise: Create a row label for row D using the front panel
To create a row label for row D using the front panel:
1. If a pattern name is currently displayed on the bottom display, press
CHAN
to place the display in
Channel view.
2. Use the navigation wheel
to select any channel on row D. For example, select
1D01
.
3. Press
CONFIG
, and then press
CHAN
.
4. Use the navigation wheel
to select
LABEL-ROW
to define a row label. The label selections
are defined as:
• LABEL:
Sets the label that is displayed on the front panel for the specified crosspoint.
• LABEL-ROW:
Sets the label that is displayed on the front panel for the specified row.
• LABEL-COL:
Sets the label that is displayed on the front panel for the specified column.
5. Change the row label to
SMU1
using the navigation wheel
to change each character.
6. Press the navigation wheel
or
ENTER
to save the change.
7. Press
EXIT
to return to the main display.
The bottom display will now use "SMU1" to refer to row D on slot 1. For example, selecting crosspoint
"1D03" prints "SMU1+03" to the bottom display. Additionally, the crosspoint display on the Model
707B updates to use the new row label.
The exercise, "
Create a script using TSB embedded
(on page
)," shows setting up labels using
the remote interface and TSB Embedded.
