Keithley 7037, Инструкция по эксплуатации

Страница: 15 / 72

General Information
1-2
Warranty information
Warranty information is located at the front of this instruc-
tion manual. Should your Model 7037 require warranty ser-
vice, contact the Keithley representative or authorized repair
facility in your area for further information. When returning
the card for repair, be sure to fill out and include the service
form at the back of this manual in order to provide the repair
facility with the necessary information.
Manual addenda
Any improvements or changes concerning the card or man-
ual will be explained in an addendum included with the card.
Addenda are provided in a page replacement format. Replace
the obsolete pages with the new pages.
Safety symbols and terms
The following symbols and terms may be found on an instru-
ment or used in this manual.
The symbol on an instrument indicates that the user
should refer to the operating instructions located in the
instruction manual.
The symbol on an instrument shows that high voltage
may be present on the terminal(s). Use standard safety pre-
cautions to avoid personal contact with these voltages.
The
WARNING
heading used in this manual explains dan-
gers that might result in personal injury or death. Always
read the associated information very carefully before per-
forming the indicated procedure.
The
CAUTION
heading used in this manual explains haz-
ards that could damage the card. Such damage may invali-
date the warranty.
Specifications
Model 7037 specifications are found at the front of this man-
ual. These specifications are exclusive of the mainframe
specifications
Unpacking and inspection
Inspection for damage
The Model 7037 is packaged in a resealable, anti-static bag
to protect it from damage due to static discharge and from
contamination that could degrade its performance. Before
removing the card from the bag, observe the following pre-
cautions on handling.
Handling precautions
1. Always grasp the card by the side edges and shields. Do
not touch the board surfaces or components.
2. When not installed in a Model 7001/7002 mainframe,
keep the card in the anti-static bag and store it in the
original packing carton.
After removing the card from its anti-static bag, inspect it for
any obvious signs of physical damage. Report any such dam-
age to the shipping agent immediately.
Shipping contents
The following items are included with every Model 7037
order:
• Model 7037 Single-Pole Relay-Digital I/O Card
• Model 7011-KIT-R 96-pin Female DIN Connector Kit
• Model 7037 Instruction Manual
• Additional accessories as ordered
!