![background image](http://html2.mh-extra.com/html/keithley/6220/6220_reference-manual_4055087131.webp)
Model 6220/6221 Reference Manual
Delta, Pulse Delta, and Differential Conductance
5-11
Return to
Model 622x communications
For Delta, Pulse Delta, and Differential Conductance, the Model 622x uses two
interfaces for communications. It uses the RS-232 to communicate with the Model
2182/2182A, and it uses the GPIB or Ethernet (Model 6221 only) to communicate
with the PC.
Configure the Model 622x for communications as follows:
1.
RS-232
– On the Model 622x, press the
COMM
key and then select
RS-232
from the communications setup menu:
a.
Set the
BAUD
rate to
19.2K
.
b.
Set
FLOW CTRL
(flow control) to
NONE
.
c.
Press the
ENTER
key.
The Model 622x will reboot if RS-232 was not the previously selected
communications interface.For details on RS-232 configuration for the
Model 622x, see
.
2.
GPIB or Ethernet
– The GPIB or the Ethernet (Model 6221 only) must be
the selected interface to allow communications with the PC:
On the Model 622x, press the
COMM
key and then select
GPIB
or
ETHERNET
(6221 only) from the communications setup menu:
•
GPIB – Set the IEEE-488 address (0 to 30).
•
Ethernet (6221) – Set the IP, Gateway, Subnet, and DHCP.
After configuring the GPIB or Ethernet, press
ENTER
. The configured
communications interface will be selected and the Model 622x will reboot.
See
for details on configuring the GPIB and Ethernet.
Arming process
After a delta test is configured, it must be armed before it can be run. The details
to configure, arm, and run each delta test are provided in
this section. The arming operations that are common to all three delta tests (Delta,
Pulse Delta, and Differential Conductance) are covered here.
Additional arming information that is unique to each delta test, can be found at the
following locations:
•
Additional “
” information for Delta is provided on
.
•
Additional “
” information for Pulse Delta is provided on
•
Additional “
” information for Differential Conductance is pro-
vided on
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Содержание 6220
Страница 16: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Страница 24: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Страница 403: ...A Specifications Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...
Страница 453: ...Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com...