Model 776 installation
1. Remove the two lower rear panel screws from the Model 776.
2. Slide the instrument onto the chassis shelf from the rear of the rack. The feet of the Model 776 will fit into holes in the shelf.
3. Position the clamp, as shown, against the rear panel.
4. Reinstall the two rear panel screws through the clamp (4288-4-305).
5. Attach the clamp to the chassis with 8-32 x
⅜
screws.
6. Tighten all screws.
Installation of spacer
Once the spacer is installed, continue with the installation instructions for 3
½
inch instruments.
Figure 3
Spacer installation
