Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
8
PA-1001 Rev. D / September 2011
Model 4210-MMPC-C
Multi-Measurement Prober Cable Kit
Quick Start Guide
Usage scenarios
I-V testing:
2-pin I-V setup
NOTE
The setup for 2-pin I-V testing requires two prober cable kits.
With two Model 4200-SMUs connected to the prober bulkhead, use the fundamental setup shown in Figure 8 to
perform 2-pin I-V testing. Figure 2 shows the SMU connections to the outside of the bulkhead.
Figure 8: Test setup for 2-pin I-V testing
I-V testing: 4-pin I-V setup
NOTE
The setup for 4-pin I-V testing requires four prober cable kits.
With four Model 4200-SMUs connected to the prober bulkhead, use the setup shown in Figure 9 to perform 4-pin
I-V testing. Figure 2 shows two SMUs connected to one of the bulkhead connection panels. Connect two additional
