Keithley 4200-SCS-PK3-903-01, Быстрый старт

Страница: 25 / 30

Run the cv-nmosfet test
To run the cv-nmosfet test:
1. In the Project Tree, make sure the cv-nmosfet test is checked and
highlighted.
2. On the toolbar, click .
While the test is running, the Run Test button turns gray and the
Abort Test button turns red. In addition, the Measuring indicator
(on the lower right corner of the front panel) is on.
3. When the test is complete, the Run Test button turns green.
View results of the cv-nmosfet test
To view data from the cv-nmosfet test, you can use the data sheets,
which are similar to Microsoft Excel spreadsheets.
To view the results of the cv-nmosfet test:
1. Click the Sheet tab for the test.
2. Select the tab for the type of information you would like to view:

Data: Displays the data.

Calc: Provides data manipulation and graphing tools similar
to Microsoft Excel.

Settings: Information about the last test that was executed.