![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750098.webp)
Section 2: General operation
Model 2657A High Power System SourceMeter® Instrument Reference Manual
2-74
2657A-901-01 Rev. B/December 2012
When you change a source value, source autoranging is automatically turned off and remains off until
you re-enable it.
Low range limits
The low range limit sets the lowest range that the Model 2657A will use when autoranging is enabled.
This feature is useful for minimizing autorange settling times when numerous range changes are
involved.
To individually set low range limits for Source V, Source I, Measure V, and Measure I:
1. Press
the
CONFIG
key, then press either the
SRC
key (for source) or the
MEAS
key (for
measure).
2. Select voltage or current source, or measure, as appropriate, and then press the
ENTER
key or
the navigation wheel
.
3. Select
LOWRANGE
, and then press the
ENTER
key or the navigation wheel
.
4. Set the low range to the appropriate setting, and then press the
ENTER
key or the navigation
wheel .
5. Press
the
EXIT (LOCAL)
key twice to return to the main display.
NOTE
Содержание 2657A
Страница 3: ......