manualshive.com logo in svg

Keithley 2657A, Справочное руководство, Страница: 676 / 805

Поделиться
Скачать
Keithley 2657A Скачать руководство пользователя страница 676

Model 2657A High Power System SourceMeter® Instrument Reference Manual 

Section 7: TSP command reference

 

2657A-901-01 Rev. B/December 2012 

7-363 

 

Details 

This command reads available data from the remote instrument and returns responses for the specified number 
of arguments. 
The format string can contain the following specifiers: 

 

%[width]s 

Read data until the specified length 

%[max width]t 

Read data until the specified length or until punctuation is found, whichever comes first 

%[max width]n 

Read data until a newline or carriage return 

%d 

Read a number (delimited by punctuation) 

 

A maximum of 10 format specifiers can be used for a maximum of 10 return values. 
If 

formatString

 is not provided, the command returns a string that contains the data until a new line is 

reached. If no data is available, the Model 2657A pauses operation until the requested data is available or until a 
timeout error is generated. Use 

tspnet.timeout

 to specify the timeout period. 

When the Model 2657A reads from a TSP-enabled remote instrument, the Model 2657A removes Test Script 
Processor (TSP

®

) prompts and places any errors it receives from the remote instrument into its own error queue. 

The Model 2657A prefaces errors from the remote device with "

Remote Error

," and follows this with the error 

number and error description. 

Example 

 

tspnet.write(deviceID, "*idn?\r\n") 
 
print("write/read returns:", tspnet.read(deviceID)) 

Send the 

"*idn?\r\n"

 message to 

the instrument connected as 

deviceID

. 

Display the response that is read from 

deviceID

 (based on the 

*idn?

 

message). 

Also see 

tspnet.connect()

 (on page 7-359) 

tspnet.readavailable()

 (on page 7-363) 

tspnet.timeout

 (on page 7-365) 

tspnet.write()

 (on page 7-368) 

 

tspnet.readavailable() 

This function checks to see if data is available from the remote device. 

Type 

TSP-Link accessible 

Affected by

 

Where saved

 

Default value

 

Function 

Yes

 

 

 

 

Usage 

bytesAvailable

 = tspnet.readavailable(

connectionID

) 

 

bytesAvailable

 

The number of bytes available to be read from the connection 

connectionID

 

The connection ID returned from 

tspnet.connect()

 

 

Details 

This command checks to see if any output data is available from the device. No data is read from the instrument. 
This allows TSP scripts to continue to run without waiting on a remote command to finish. 

 

Содержание 2657A






































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов