![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750681.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-368
2657A-901-01 Rev. B/December 2012
Also see
None
tspnet.tsp.runscript()
This function loads and runs a script on a remote TSP-enabled instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tspnet.tsp.runscript(
connectionID
,
script
)
tspnet.tsp.runscript(
connectionID
,
name
,
script
)
connectionID
Integer value used as an identifier for other
tspnet
commands
name
The name that is assigned to the script
script
The body of the script as a string
Details
This function is appropriate only for TSP-enabled instruments.
This function downloads a script to a remote instrument and runs it. It automatically adds the appropriate
loadscript
and
endscript
commands around the script, captures any errors, and reads back any prompts.
No additional substitutions are done on the text.
The script is automatically loaded, compiled, and run.
Any output from previous commands is discarded.
This command does not wait for the script to complete.
If you do not want the script to do anything immediately, make sure the script only defines functions for later use.
Use the
tspnet.execute()
function to execute those functions at a later time.
If no name is specified, the script will be loaded as the anonymous script.
Example
tspnet.tsp.runscript(myconnection, "mytest",
"print([[start]]) for d = 1, 10 do print([[work]]) end print([[end]])")
Load and run a script entitled
mytest
on the TSP-enabled instrument connected with
myconnection
.
Also see
tspnet.write()
This function writes a string to the remote instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tspnet.write(
connectionID
,
inputString
)
connectionID
The connection ID returned from
tspnet.connect()
inputString
The string to be written
Содержание 2657A
Страница 3: ......