14
Front-panel operation
Figure 8
Eliminating the effect of a current transient on a pulse current measurement
Front-panel operation for performing pulse current
measurements
All of the following settings are available in submenus of PULSE CURRENT #1/#2
main menu items. Scroll through the main menu and when PULSE CURRENT #1/
#2 is displayed, press ENTER to access the sub-menus.
Turn on the output
Press the OPERATE key after setting the appropriate voltage and current limits for
the DUT.
Select CURRENT RANGE
Select appropriate range:
battery channel (#1) = 5 A, 500 mA, 50 mA, or 5 mA
charger channel (#2) = 5 A
NOTE
In
Figure 8
, a trigger delay of 100
μ
s is used to eliminate the
effect of a current transient on the pulse current measurement.
