2260B
Series
Programming Manual
54
Parameter
<NRf>
0~32767
Return parameter <NR1>
0~32767
STATus:PRESet
Description
This command resets the ENABle register, the
PTRansistion filter and NTRansistion filter on the
Operation Status and Questionable Status
Registers. The registers/filters will be reset to a
default value.
Default Register/Filter Values
Setting
QUEStionable Status Enable
0x0000
QUEStionable Status Positive Transition 0x7FFF
QUEStionable Status Negative Transition 0x0000
Operation Status Enable
0x0000
Operation Status Positive Transition
0x7FFF
Operation Status Negative Transition
0x0000
Summary: The Questionable Status Enable
registers and the Operation Status Enable registers
are both reset to 0.
The Questionable Status and Operation Status
Positive Transition filters are all set high (0x7FFF)
and the Negative Transition filters are all set low
(0x0000). I.e., only positive transitions will be
recognized for the Questionable Status and
Operation Status registers.
Syntax STATus:PRESet
Set
Содержание 2260B Series
Страница 12: ...GETTING STARTED 9 Appearance 2260B Front Panel 2260B 80 27 2260B 30 72 720W 2260B 80 13 2260B 30 36 360W ...
Страница 15: ...2260B Series Programming Manual 12 Rear Panel 2260B 80 27 2260B 30 72 720W 2260B 80 13 2260B 30 36 360W ...
Страница 37: ...2260B Series Programming Manual 34 ...
Страница 82: ...REMOTE CONTROL 79 The Status Registers ...