Page 42
DOC0945 (22 August 2022 15:28)
www.keit.co.uk
Back to Table of Contents
Rear panel
Figure 36
Rear panel view with blanking plate in position
Connections available:
•
HMI: 1x VGA, 1x HDMI, PS2 keyboard, PS2 Mouse, Mic-in & Line-out
•
USB:4 (2 x USB3.0, 2 x USB2.0)
•
Networking: 2 x Gigabit LAN / Ethernet
•
Serial Data: 3 x RS232/422/485 COM ports
•
Mains Power
A removable blanking plate (shown in Figure 3) is fitted as standard with 4 retaining fasteners.
This is to prevent tampering with 1 x Ethernet, 4 x USB, 2 x PS2 and HDMI ports.
Information for Fibre Optic Patch Panel
The fibre-optic connectors are LC connectors manufactured by Souriau. If you wish to make
a patch panel then a duplicate set of these will be required:
Existing Jam Nut Receptacle on rear of controller
UTS718LCN
New Required Plug
UTS6-JC18LCN
Wiring Pin Out for COM Ports
The COM ports are terminated with standard 9-way male D-sub Connector Plugs. The COM
ports are configured in the BIOS by default to RS485 (RS232 and RS422 is available if
required).
