CALIBRATING YOUR KEISER M SERIES EQUIPMENT
Procedure for software version U406 and above
STEP 7
STEP 8
STEP 9
555512_D
6X
1 ROTATION ONLY
Until the computer shows 0:01 in the time row
Slide the calibration tool
from the magnet housing.
Remove
the
calibration
tool from the flywheel.
Rotate the pedal, no more
than one turn, until the
computer shows 0:01 in the
time row, continue turning
for
one-half
revolution
then stop the crank arm.
Once you see 0:01 appear
on the display, twist and
release the magnet housing
6
times.
The
magnet
housing must rotate from
stop to stop.