manualshive.com logo in svg
background image

15

AIR300 LEG EXTENSION PRO

OPERATION MANUAL

MAINTENANCE

PREVENTATIVE MAINTENANCE SCHEDULE

Daily

• 

Check for safe and proper function of the equipment (perform “Proper Operation 

Check,” page 11).

• 

Clean the chrome and paint where applicable.

• 

Wipe down the equipment with a clean cloth. If necessary, use water and mild soap 

(neutral,  non-caustic).  Target  areas  that  come  in  contact  with  sweat.  Wipe  dry  the 

equipment.  

Monthly

• 

Check externally visible screws are fastened properly with no looseness. 

• 

Clean and lubricate Cylinder Rods.

• 

Inspect Air Line for kinks, tears, or breaks.

• 

Inspect Frame for any weakening in weld areas, and other connected areas.

Quarterly

• 

Lubricate Pivot Bushings.

• 

Inspect Exhaust Mufflers and Air Filter for discoloration; replace if necessary.

• 

Verify compressor(s) cycle on/off between 100-120 psi (6.89–8.27 bar).

Annually and 
other Required 
Maintenance

• 

For complete instructions, see page 17 “Annual Maintenance.” 

• 

Battery Replacement. The low battery signal (“Lo-bA”) will appear on the Power Display 

when it is time to replace the batteries. Refer to page 16 “Battery Replacement” for 
complete instructions.

NOTE: 

Your Keiser Air Compressor (not included with your Air300 Leg Extension Pro) 

requires basic annual maintenance. Contact Keiser Customer Support for Air Compressor 
operator manual or download at keiser.com/support

 (search: Air Compressor manuals).

Weekly

• 

Check parts most susceptible to wear are not damaged or broken:

 

– Upholstery, Belt/Linkage System, Thumb Buttons, and Hand Grips.

• 

Wax chrome and paint where applicable; wax upholstery.

• 

Clean Hand Grips.

• 

Inspect Air Line Filter.

Contact Keiser Customer Support for replacement parts order, or for any matters regarding the safe operation of your 

Air300 Leg Extension Pro (see back cover for contact information).

IMPORTANT: 

Do not use household or industrial cleaners as they contain caustic chemicals that can destroy the paint finish 

and cause corrosion. Use only 

mild soap/detergent (neutral, non-caustic) to clean.

CAUTION: SERVICE AND REPAIR SHALL ONLY BE PERFORMED BY KEISER-CERTIFIED TECHNICIANS. 
Failure to follow these instructions can result in serious injury.

CAUTION: THE HIGHEST LEVEL OF EQUIPMENT SAFETY CAN ONLY BE ENSURED IF THE EQUIPMENT IS 
REGULARLY INSPECTED FOR DAMAGE AND WEAR.

 Immediately replace damaged, worn, or broken parts. Do not 

use the Air300 Leg Extension Pro until all repairs have been completed and tested by a Keiser-certified technician.

Содержание LEG EXTENSION PRO AIR300





















Отзывы: