Keil MCB517AC, Руководство пользователя

Страница: 56 / 61

50 Chapter 5. Using the 8051 Monitor
Chapter 5. Using the 8051 Monitor
The MCB517AC comes ready-programmed with the Keil Monitor51. The
monitor programmed in the Monitor EPROM is setup to run at various baudrates
and serial interfaces depending on the setting of DIP switches S3 and S4.
You may use the MON51 DOS terminal program (MON51.EXE) or the dScope
for Windows debugger/simulator to quickly download and test your programs.
Please note that a banked application cannot be debugged with MON51; you
have to use dScope for Windows in this case.
MON51 Terminal Program
The MON51 terminal program communicates with the 8051 monitor using one
of your PC’s serial ports. MON51 lets you:
n
Display the contents of the 8051’s memory areas in ASCII and hexadecimal,
n
Interactively change memory contents,
n
Display and change register contents,
n
Initialize memory with constant values,
n
Disassemble the code area,
n
Assemble in-line code,
n
Run programs with breakpoints in real-time,
n
Create up to 10 program breakpoints,
n
Single-step through your program,
n
Step over subroutines,
n
Upload and download Intel HEX files and OMF-51 object files,
n
Display an online command help menu.