Keil MCB517AC, Руководство пользователя

Страница: 45 / 61

MCB517AC Evaluation Board User’s Guide 39
This process it historically called making the project. While the make is running,
µVision displays the status as shown below.
If errors occur during the make process, a message window appears. If there
were warnings or errors in your source file, you may interactively select the error
and see the corresponding line in your source file.
When make completes successfully, you are ready to begin debugging the
BLINKY program.
Using dScope to Debug the BLINKY Program
To load the BLINKY in the MCB517AC evaluation board using dScope, you
need to perform the following steps:
n
Load the MON51.DLL CPU driver.
n
Configure the CPU driver for the appropriate COM port and baud rate.
n
Configure the CPU driver for serial break.
n
Load the BLINKY program.
n
Step through the BLINKY program.
Each of these steps is described in detail below.
Start dScope by selecting the dScope Debugger… command from the Run menu.
This loads dScope and sets the current path to the path in which your project file
is saved.