Keil MCB167-NET, Руководство пользователя

Страница: 26 / 31

26 Chapter 4. Programming
NET\Blinky\Start167.A66 to your project folder. This file is already
correctly configured for the MCB167-NET board.
Set tool options for MCB167-NET hardware.
Project - Options for Target
opens the µVision2
Options
for Target - Target
configuration dialog.
When you are using Monitor-
166, the complete target
application need to be stored
in RAM space. Therefore
you need to split the 1MByte
RAM space available on the
MCB167-NET into a ROM
section for program code and
a RAM section for data. A
possible selection is shown
on the right.
In the page Options – L166
Misc you should enter under
Reserve the memory regions
used by the MCB167-NET
Monitor configuration. The
required address ranges for
pre-configured Monitor
variants can be found under
Options – Debug – Settings
– Description
.