KEHUA TECH SPI-B2S Series Скачать руководство пользователя страница 12

Страница: 12 / 63

1Safety Description

PV Grid-Connected Inverter SPI-B2

Series

(1500-6000) User Manual

Co.,Ltd

The device must be connected with protection earthing permanently. Before operating, please

check the electric connection and ensure the device has been connected to earth reliably.

1.1.5 Moisture-proof Protection

Moisture incursion may cause the inverter damage!

For normal use of the energy-storage converter, please comply with the following items.

If the atmosphere humidity larger than 95%, please do not open the inverter.

On overcast or rainy or moist condition, avoid opening panel to maintain or do other operation.

1.1.6 Safety Warning Label Setting

To avoid irrelevant person close to or misoperate the inverter, during installation or daily maintenance,

please abide by the related standards.

Set warning labels at the front end and back end of the inverter to avoid wrongly close and even

cause accident.

Set warning label board or safety warning area to avoid irrelevant person entering and cause

human injury or device damage.

1.1.7 Electrical Connection

The electrical connection must be done on the basis of the illustration and electrical wiring principle

mentioned in this manual.

The PV array and grid level, frequency, etc. must accord with the inverter’s specification.

The grid-connected generation must be allowed by local power supply department and operate by

professionals.

All the electrical connection must accord with the electrical installation standard of local nation and

district.

Содержание SPI-B2S Series
































































Результаты поиска

Содержание SPI-B2S Series

Отзывы:

Бренды по названию

Популярные бренды

KEHUA TECH SPI-B2S Series, Руководство пользователя

Результаты поиска

Содержание SPI-B2S Series

Отзывы:

Бренды по названию

Популярные бренды