RAPT Pill Hydrometer & Thermometer Quick Start Guide
Page
6
of
10
Last Updated 1/12/2021 12:53 PM
SLEEP MODE
The RAPT Pill Hydrometer will enter sleep mode when the device is in a horizontal orientation. It will
automatically wake up when its orientation is changed indicated by the illumination of a green light
on the circuit board.
When not in use ensure the RAPT pill hydrometer is in a horizontal orientation to ensure it remains
asleep.
OPERATION INSTRUCTIONS
Your RAPT Pill Hydrometer comes pre-calibrated and ready to go after charging, assembly and device
registration. For calibration steps refer to the
1.
Submerge your RAPT Pill hydrometer in a glass of pint water to test for leaks prior to placing
into your fermenter.
2.
Sanitise your RAPT Pill Hydrometer with an approved sanitiser such as
which has been correctly diluted according to the instructions on the
sanitiser’s container.
3.
Drop your RAPT Pill Hydrometer into your fermenter to monitor the specific gravity and
temperature of your brew in real time which is relayed to the RAPT portal for logging.
