During maintenance and repair operations, remember to interrupt the electrical power connection by
switching off the mains and by unplugging the machine. This operation must be carried out to avoid
accidentally starting the machine which could cause injuries to people and damage to the machine.
To wash the machine correctly, open it , remove the basket and eliminate any residue inside it. To remove all
residue from the rollers, these should be washed from the top and from the bottom.
During washing pay attention to the motor.
For washing use hot pressure water and neutral detergent.
Once washing is completed, if the machine is not to be used for a long period of time, proceed as follows:
Open the carter that protects machine gear.
Grease all chains, internal gear, supports.
Grease the roller and the agitator support.
To polish the machine’s metal surface, use vaseline oil on the inox surface, or detergent for alimentary use on
the painted surface.
Any maintenance must be attend my specialized and qualified worker. Use suitable lubricants to
come in contact with foodstuffs.
It is not possible disassemble the engine. If it is necessary ask before to the reseller.
In the event of any repairs you need to use original spare parts directly contacting the dealer or Manufacturer.
To use not original spare parts or not allowed, is reason of decline of the warranty and of the
Declaration of Conformity.
9. PROBLEM SOLVING
INCONVENIENTI
RIMEDI
The machine has difficulty in starting. Check that machine is receiving the correct line voltage.
Do not use extension leads that are too short as this could cause a
voltage reduction.
Check the tension of the transmission belts with the register provided.
The machine doesn’t start
Make sure machine is plugged in. check the capacitor inside the engine.
The screw or agitator doesn’t move
Verify that the transmission gears are intact and well locked on the
shaft of the roller.
Adjust the distance between the rollers with the appropriate screw
placed on the support.
Some berries or fruit are not pressed Check the transmission gear are working good, and well fixed on the
roller shaft.
Adjust the distance between the roller and make for strong the support.