BrewZilla 35L - Gen 4 Instruction Manual
Page
9
of
31
Last Updated 22/03/2022 16:53 PM
Assembling the Tap
The BrewZilla is shipped with the tap assembled but not fitted to the boiler to minimise the
risk of damage in transport.
Unscrew the hex nut and retaining nut from the tap. Push the barb with seal into the tap
and ensure the silicone seal is on the tap body prior to installation.
Then turn the BrewZilla upside down and insert the thread of the tap through the pre-drilled
hole in the boiler. Secure the tap on the inside of the boiler using the hex nut and secure the
barb in place by tightening the retaining nut onto the taps thread.
