Benchy
–
Glycol Instruction Manual
Page
2
of
9
Last Updated 14/12/2020 5:29 PM
WARNING
IF THE BENCHY HAS JUST BEEN MOVED DO NOT TURN ON UNLESS THE
BENCHY HAS BEEN STANDING UPRIGHT FOR 24 HOURS. FAILURE TO DO SO
WILL VOID WARRANTY. STAND THE BENCHY IN THE UPRIGHT POSITION
FOR 24 HOURS BEFORE PLUGGING INTO THE MAINS SOCKET
WARNING
PERFORM A PRESSURE TEST ON ALL PRODUCT LINES PRIOR TO USE
WARNING
ENSURE THAT THERE IS ALWAYS ATLEAST 100mm OF CLEARANCE ON EACH
SIDE OF THE BENCHY TO ALLOW ADEQUATE AIRFLOW. NOT ALLOWING
ADEQUATE VENTILATION WILL REDUCE PERFORMANCE, INCREASE POWER
CONSUMPTION AND VOID WARRANTY
WARNING
DO NOT RUN THE PUMP DRY. ENSURE THE PUMP IS ALWAYS SUBMERGED
WHEN IN OPERATION. RUNNING DRY CAN DAMAGE THE PUMP
WARNING
ONLY CLEAN PRODUCT LINES WITH COLD TO WARM WATER. DO NOT USE
HOT WATER TO CLEAN THE PRODUCT LINES.
