Kegel Toner, Инструкция по эксплуатации

Страница: 25 / 32

24
the metal plates on the Kegel
Trainer and your skin.
that in a few weeks of stimulation the contact
improves. If it does not, this unit may not be
suitable for you. You may need to contact
your healthcare professional to discuss
other suitable options.
iii) The Kegel Trainer supplied with the unit has
a 28 mm diameter. An optional 32 mm Kegel
Trainer , part no. X-VPM , is available.
No sensation
and no LEADS
alarm showing Intensity level is not high
enough
and/or reduced
sensitivity in the area being
treated.
i) Please make sure you are increasing the
intensity high enough. Most people will start
to feel the stimulation in their hand at around
25 mA and with the
Kegel Trainer inserted
you will need to increase the intensity higher
to around 40 mA
– 60 mA. Max power is 99
mA. Everyone is different so just keep
increasing the intensity until you can feel it.
The intensity increases in very small steps of
1 mA.
ii) You may have reduced sensitivity due to
previously damaged or desensitized
pudendal nerves (this can happen in
childbirth or some surgical procedures).
Please consult your healthcare professional.
No sensation
on one side of
the Kegel
Trainer (or
electrode) Position is not optimal
–
needs adjusting.
The current flows from one side of the Kegel
Trainer to the other, so it is not possible to have
one side “not working”. However, the strength
of the sensation depends on how close to the
nerve the current flows, and also in which
direction it flows relative to the nerve. You can
try slightly adjusting the position on the
Kegel
Trainer , or exchanging the connection of the
wires in the Kegel Trainer .
Sudden
change in
sensation If you disconnect and re-
connect a few minutes later,
the signal will feel quite a lot
stronger. Always return strength to zero after
disconnecting the lead or the Kegel Trainer .
The patient is an intended operator. There are no user-serviceable parts inside the
unit, and no calibration is required.
If the above review has failed to resolve your problem, or to report unexpected
operation or events, call TensCare or your local dealer (address on back cover) for
advice.
Contact TensCare customer service on +44 (0) 1372 723 434. Our staff are trained to
assist you with most issues you may have experienced, without the need to send your
product in for service.