manualshive.com logo in svg

Kegel FLEX 17-5801, Руководство оператора

Поделиться
Скачать
Kegel FLEX 17-5801 Скачать руководство пользователя страница 97

85 
 

8.

 

There is always the chance for operator error when it comes to conditioning 

machines.  Always do spot checks on employees that operate the machine to make 
sure they do the job properly. 

 

9.

 

We hope this does not happen to you…but make sure that conditioner was not put 

in the cleaner tank.  Sounds funny, but this happens more than you think and it is no 

fun to fix. 
 

10.

 

Did someone put the wrong conditioner in the oil tank or use the wrong cleaner?  
Always make sure that your KEGEL lane machine uses KEGEL products.  We have 

thoroughly tested and established recommendations for all of our lane maintenance 

chemicals and supplies.  It just makes sense to use KEGEL Genuine products. 

 

 
 

 

Содержание FLEX 17-5801
















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды