KEFFNER AIR AIR 20, Руководство пользователя

Страница: 26 / 39

USE AND OPERATION
Cleaning and care
CLEANING AND CARE
cleaning and maintenance .
Please remove plug from the socket before
●
●
If machine is too dirty, neutral detergent can be used for cleaning,
but please dilute the detergent before use.
●
Do not clean the unit with the solvent listed on the right which may cause distortion or discolour.
● If the "Filter replacement indicator" is always flashing, it means the filters life time comes to the end,
please clean or replace new filters.
● After cleaning or replacing new filters, please press" Filter replacement indicator" icon,
then it will stop flashing, the machine starts to record the filters using time.
Cleaning the body for this device by damp cloth, then wipe it dry.
Decontamination
power
Alkalescence
Benzene
Acohol
Scour
9 10
Power Setting
Speed Setting
Timing setting
Press the "Timing" icon, the unit can be timed to operate for intervals of
2 hours, 4 hours and 8 hours, stopping automatically when the selected
operating time has elapsed. The diagram as follows:
Child Lock: Hold the "Power" icon for 5 seconds
until the unit bleeps once. This will lock the
controls and prevent them from been adjusted.
The lock can be removed by holding the button
for another 5 seconds.
Auto Setting
Press the "Power" icon to turn on or switch off the unit.
The diagram as follows:
Press the "Speed" icon you can cycle between maximum air
purification on high speed to lower air flow but quieter operation
mode with lower fan speed. The fan speed of the unit can be
adjusted when the unit is in operation (Low, Med, High ).
Each time that you press on the "Speed" icon,the speed is adjusted
from low to medium to high. The diagram as follows P1:
Sleep Mode: Hold the “Speed” icon for 5 seconds until the unit bleeps once,
the sleep mode will be on, if pressing any icons, the sleep mode will be cancelled.
Sleep mode is night mode, fan speed and noise are very low, all indicators are
not lighted. The diagram as follows P2:
P1: Speed adjustment
P2: Sleep mode
◆
the machine will check the air quality and control its
working status automatically. Press "auto" icon
again to quit the auto mode.
◆
If machine is set as smart mode, the "Speed"
icon can't be adjusted.
◆
There are 3 colors of purification indicator
representing the air quality and working status
as following:
Press "auto" icon to enter into smart mode,
Green -Good air quality
Orange-Moderate air quality
Red- Bad air quality
◆
the air quality indicator will flash.
When you choose smart mode, the unit will take 3 minites to warm up,
Air quality light
A
A A
A
A