KEEWAY ATV250, Руководство по обслуживанию и ремонту

Страница: 73 / 97

69
T h e r e l a t i o n a l o f m a t t e r s o f t h e b a t t e r y
Proportion
Full accumulation:1.220-1.240.
Term of electrification
：＜
1.220.
Use densimeter to check the battery.
Warning
Disassemble the cathode perior to the anode.
Replace it if the protuberance is cankered by sulfate
；
Replace it if there is too much deposition at the bottom.
Electrification Electrification of the proportion of it is less than 1.220, adjust it acconding to the temperature.
Current
Of electrification
Type 7.0AH
：
≤ 0.7A
；
Type 9.0AH
：
≤ 0.9A
。
Time of
Electrification(m)
New:8-12
；
Old:12-14.
Warning
Open all the caps before electrification
；
Keep the accumulater for away from fire
；
Ttub on the electrical switch during electrification
；
Electrification is forbidden if the temperature of electrolyte is higher than 45
℃ ；
Avoid quick electrification.
Assembly Assemble anode perior the cathode.
Capability 12V 9.0A.H.
Charger
for suggestion
Manufacturer
：
ELAK
，
Type
：
C1/48
Liquid densimetre
for advise
Manufacturer
：
THIMSON
，
Type
：
108
NOTE: 1
、
Fill the battery with distilled water up to the limit (using acidity liquid
to fill the old battery is forbidden)
；
2
、
Make sure the battery full of electrolyte is electrificate under a cool
condition
；
3
、
Asure that the aeration tube is not jammed or bended the aeration tube must
be expendtie
；
4
、
If the cycle knockes off for a long time, electrificate it first, then connect the anode
to the body (disassembl the cathode of the battery).