17" LCD Open frame SAW TM
（
the Water-proof Type
）
User Guide (Rev1.0)
KeeTouch all rights reserved. The information in this document is subject to change without notice
- 7 -
Your monitor has standard VESA mounting holes on the rear of the unit. The holes are
spaced at 75mm and 100mm standard.
NOTE:Do not penitrate the M4 screw into the monitor more than 5mm.
2.5 Interface Connection
Note: Before connecting the cables to your touchmonitor and PC, be sure that the
computer and touchmonitor are turned off.
1. Connect one end of either the serial (RS232) cable or the USB cable(but not both) to the
rear side of the computer and the other end to the LCD monitor. Tighten by turning the two
thumb screws clockwise to ensure proper grounding ( USB cable does not have thumb
screws).
2. Connect one end of the video cable to the rear side of computer and the other to the LCD
monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding.
