Check machine condition
Slim Jim Idrocompresso User manual
page 35
External temperature probe (option)
Figure 29. Showing the heating element indicator lights (Triplette) and connection for an external NTC-
probe on the bottom of the electrics tray. Compare to
If you have the optional external probe, plug into the machine and set the interface to show its
temperature (see page
) to check individual temperatures of brews and/or hot water.
Note!
Although quick in response, the external probe cannot change temperature “immediately”. This is due
to (1) the “mass” of the instrument and (2) sample rate. As such, the probe can be used to measure
“real time” brew temperature but the temperature displayed will always be lagging a bit with respect to
actual temperature.
external NTC
heating element indicator lights
(---------steam---------) (---------coffee---------)