ELECTRICAL PRUNING SHEAR
68
• Make sure the battery is fully charged before first time using.
• The battery is not fully charged when you buy, you must charge 2.5 hours
before using first time.
• Re-charging battery when indicator shows a blinking light.
• Do not charge batteries over 5 hours, don’t use up completely otherwise
battery life will be reduced.
• Need to replace battery if battery running time is not enough. Users can
only use the original equipment manufactured by the customer center
(OEM) battery pack.
• Keep safety rules and environment protection information in mind all the time.
10.1 BATTERY CHARGING PROCEDURE
• Charge at temperature of + 10°C ~ + 22°C indoor.
• Make sure the switch at “OFF” position before charging.
• Connect adaptor of charger with battery correctly.
• Make sure specifications on battery and adapter matched before charging.
• Red LED light on the charger indicates the battery is charging, green LED
light indicates fully charged, average charging time is about 2.5 hours.
• Pull out connector from power and battery after fully charged.
• Please make sure the battery charged at least once every three months
when the battery is not using.
11. WORKING ENVIRONMENT
• Keep temperature of environment at 0°C ~ 45°C when charging battery,
-10°C ~ +60°C when battery is working.
• Keep tool at temperature of -5°C ~ 30°C when working
• Do not use in explosive atmosphere or near flammable substances or gases.
• Do not use in case of rain or on wet branches
