Keep Safe Sagl PERSONAL GPS 3, Руководство пользователя

Страница: 6 / 13

6
3 Installation
3.1 Install/Remove GSM SIM card
1) Turn off the terminal
2) Open the USB rubber plug
3) Put the GSM SIM card in the SIM card slot until you hear the “click” sound.
4) Please turn the terminal off before you remove the SIM card.
WARNING: Must turn off the termina l before removing the SIM card.
3.2 Power ON/OFF
Long press “ON/OFF” button to turn the terminal on/off.
3.3 Charging battery
When the red LED light is flashing quickly, it means the battery is low and
needed to be charged in time. And please charge before using at the first time.
1) Connect the charger to power;
2) Open the rubber plug;
3) Connect the charger into the USB slot;
4) This process may take 4-6 hours. During this period, it is normal that the terminal,
battery and the charger become hot.
5) If the red LED is continuously bright, it means it is charging. If the red LED is
flashing slowly, then it means it is fully charged.
WARNING:The terminal must be placed in a ventilated place in 0
℃
-4
℃
. Using
not certificated charger might cause danger and will be considered against the
warranty terms