Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 32 of 35
3.4 Calibrating the squaring arm scales
The top edge of the squaring arm slides left to right to enable
calibration. Use the 3mm Allen (hex) key to loosen the screw in
the back of the squaring arm if adjustment is necessary.
Slide the production stop onto the outside edge of the squaring
arm as shown.
Clamp a piece of card in the machine and move the production
stop to it.
