Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 27 of 35
Unclamp and turn the board around (like the page in a book) and
place it back in the machine so the same edge is still on the
squaring arm but do not clamp it. Align and engage the blade so
it enters the previous made cut at the bottom edge of the board.
Now apply the clamp.
Raise the cutter to the top of the board, if the machine is square
the blade should enter
the same cut as made previously. If not refer to
adjustment.
