4
Congratulations and thank you for purchasing KEEMPLE Automation
Gateway device. Below you will find useful operating guidelines.
WARNING!
The 5V port of this unit is to be connected only to the devices whose power feeding
meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited
Power Source according to IEC 60950-1.
1. IMPORTANT SAFETY INFORMATION
Before using Keemple Automation Gateway, please read the following information to
avoid any potential dangers:
1.
Read the instructions carefully and follow the precautions in this manual. All
mains connections, must be carried out by a trained and qualified person
2.
Use only the original mains adaptor supplied with the device
3.
Disconnect the device from mains (mains chargers) before cleaning. Clean the
device with a damp cloth, do not use detergents
4.
Do not use device in gas-filled environments
5.
Do not place the device near heat sources
6.
Do not expose the device to direct sunlight
7.
Do not place cables and/or power supplies under heavy objects. Also, avoid
routes near sharp or abrasive objects and walkways
8.
Keep out of reach of children
9.
Do not carry out any maintenance on the device, instead contact your supplier
10. Make sure that ventilation slots and the cooling unit are not covered
11. As the device generates heat, this can lead to discoloration on the surface of
furniture. Make sure there is at least 10cm of clearance around the device
12. The device must not be located in the rooms with a high level of humidity e.g.
kitchen, bath- rooms, etc.
13. Under no circumstances should you open the device or the mains adaptor. A
qualified engineer must perform this out.
14. Do not touch any contacts on the device with your fingers or metal objects.
This could cause a short circuit
15. Do not handle the device when your hands are wet due to risk of electric shock
Содержание KP-GW-01
Страница 1: ...Ordering Code KP GW 01...
Страница 2: ......
