Keeler Pulsair Intellipuf, Инструкция по эксплуатации

Страница: 17 / 132

13 EN
Pulsair Intellipuff Tonometer by KEELER
9. DISPLAY EXAMPLES
Standby
The tonometer will display STBY when power is on.
System Initialisation
The unit will display WAIT for one second while the system
initialises.
OK
When no fault is found, OK is displayed and the tonometer
defaults to measure the right eye OD.
Shows first reading of 14mmHg.
The LED OD / OS indicator shows which eye the reading
relates to.
Reading to 0.1 significant figure
If 0.1 significant figure is selected using the menu options.
In this case there is no indication on the display that the
reading is the first or average of more than 1.
IOP greater than 25mmHg
When a pressure (IOP) of greater than 25mmHg is detected,
the unit will display >25, the puff intensity will automatically
be increased from the soft puff to the normal puff level for
subsequent measurements.
Self-test
The unit will perform regular Self-tests – if a possible
discrepancy in operating parameters is suspected the ‘RUN
TEST’ message will be displayed for up to 15 seconds. To
continue to use the tonometer press the OD / OS button
to clear the message. The results displayed thereafter may
be suspect. Refer to the User Menu Options section in this
manual for guidance on running the Self-test.
Error
Display shows error. (Signified by a long high pitch sound).