Keeler KAT R, Инструкция по эксплуатации

Страница: 22 / 68

18
EN
KAT R Type and T Type Tonometer by KEELER
Calibration Position 1.95:
Rotate the measurement drum 2 calibration downward
by the width of one calibration mark (see Figure 6). When
the sensor arm is in the free movement zone, it should
move against the stop in the examiner’s direction.
Calibration Position 2.05:
Rotate the measurement drum 2 calibration upward by
the width of one calibration mark (see Figure 7). When
the sensor arm is in the free movement zone, it should
move against the stop in the patient’s direction.
Check procedure with the calibration arm set to 6
The Tonometer check procedure with a scale 6 calibration
is very similar to those described above. The checkpoints
are 5.9 and/or 6.1. Rotate the “6” calibration mark on
the drum through ½ interval downward and/or upward,
respectively, with respect to the index mark.
2
2
Figure 6
Figure 7
6
6
Figure 8
Figure 9
11. SERVICING AND CALIBRATION
Keeler recommends annual calibration of the instrument. This must be performed by an
authorised service centre or distributor.
There are no user serviceable parts in this instrument. Service manuals will be available to
authorised Keeler service centres and Keeler trained service personnel.