VW010
Issue 02
PLEASE BE ADVISED:
Before assembling the Valley-Walk for the first time, it is highly recommended
that Installers familiarise themselves with the component parts and carry out a test assembly and
disassembly in a safe area away from the point of final installation. All component parts detailed in the
operating instructions must be used in the assembly of the system. Should a piece be missing or
appear defective do not continue to assemble and contact Easi-Dec Immediately.
Step1 Step 2
Lay out the components ready for assembly. The valley-Walk is in
folded condition with Velcro straps.
Release the Velcro straps and unfold the valley-Walk.
Step 3 Step 4
Remove the pin from the bottom rail and release the Velcro strap.
Lower the bottom Rail to the floor while an operative holds the main
frame.
Step 5 Step 6
Repeat Steps 3 & 4 for the opposite side of the valley-Walk.
Stand the second half of the Valley-Walk up and release the Velcro
straps.