KEDDY K800 Series, Руководство по установке

Страница: 7 / 16

1. When the outer packaging has been removed, the
stove is screwed on a wooden pallet. Start by open -
ing the door, by pressing up the handle on the bot -
tom right. Take out the box with installation fittings. In
the box, you will find an electric cable, a globe, base
glass, a rear sleeve connection and an outdoor air kit
(accessory), if this has been ordered.
The opening handle can be removed (optional) since
the lock can be operated using the glove by press -
ing directly on the lock hasp, on the lower right of the
door.
NOTE! To close the door, push it closed without
lifting the lock hasp.
2. Remove the log guard, the grate and the ash pan.
3. Remove the hearth plates. Begin by pressing the
smoke shelf upwards so you can remove one of the
side plates. After this, remove in order the smoke
shelf, the second side plate and finally the back plate.
4. Remove the bottom stone by lifting it upwards and
turning it to the side.
- 7 -
GRATE
ASH PAN
LOG GUARD
SIDE PANEL
SMOKE SHELF
BACK PLATE
BOTTOM STONE