KEDDY K700, Руководство по установке

Страница: 3 / 12

GENERAL
Thank you for choosing our wood burning stove!
The K700 has a number of unique characteristics, for example:
* Easy to install.
* Unique combustion system for greater safety and the best protection of the environment
* Modern innovative design
* Cast iron combustion chamber for long service life
Important! Save these installation instructions and the associated firing instructions!
Quality approval
The K700 has been tested at a certified testing institute and meets the requirements in the Swedish Building
Regulations and for CE Marking. The K700 is intended for use as a secondary heat source.
Manufacturer's declaration
The K700 has been manufactured in accordance with the documents that form the basis for the respective
certificates and their associated requirements for production inspections.
IMPORTANT POINTS
* Contact the Planning and Building Committee in your municipality concerning the building notice.
* It is also recommended that you contact a certified chimney sweep prior to installation.
*
NOTE! Read through all of the installation instructions before beginning the installation.
* Remember to carefully follow the instructions for the distance to flammable structural units, see p. 4.
* Make sure that you get the right dimension and length of the flue, see p. 4.
* The installation has to be inspected by a certified chimney sweep before you start firing.
* In order for the warranty to apply, it is important you follow the care and firing instructions carefully, see
pages 10-11.
* WARNING! Parts of the stove become very hot during operation and may cause burn injuries if they are
touched. A glove is enclosed with the delivery, use this when handling door and damper.
* To guarantee the function and safety of the stove, we recommend that a professional perform the installa -
tion. Our dealers can recommend suitable fitters. You can find information about our dealers on www.keddy.
se.
* “The Clean Air Act 1993 and Smoke Control Areas”
Under the Clean Air Act local authorities may declare the whole or part of the district of the authority to be a
smoke control area. It is an offence to emit smoke from a chimney of a building, from a furnace or from any
fixed boiler if located in a designated smoke control area. It is also an offence to acquire an “unauthorised
fuel” for use within a smoke control area Application Pack unless it is used in an “exempt” appliance (“exempt -
ed” from the controls which generally apply in the smoke control area).
The Secretary of State for Environment, Food and Rural Affairs has powers under the Act to authorise smoke -
less fuels or exempt appliances for use in smoke control areas in England. In Scotland and Wales this power
rests with Ministers in the devolved administrations for those countries. Separate legislation, the Clean Air
(Northern Ireland) Order 1981, applies in Northern Ireland. Therefore it is a requirement that fuels burnt or ob -
tained for use in smoke control areas have been “authorised” in Regulations and that appliances used to burn
solid fuel in those areas (other than “authorised” fuels) have been exempted by an Order made and signed by
the Secretary of State or Minister in the devolved administrations.
Further information on the requirements of the Clean Air Act can be found here : https://www.gov.uk/smoke-
control-area-rules
Your local authority is responsible for implementing the Clean Air Act 1993 including designation and supervi -
sion of smoke control areas and you can contact them for details of Clean Air Act requirements”
“The Keddy SK1000, K1100 and K700 have been recommended as suitable for use in smoke control areas
when burning wood logs and fitted with a mechanical stop to prevent air control closure beyond the 30% open
position.”
- 3 -