Kedacom NVR2881-16016B/16HI, Руководство по установке

Страница: 9 / 16

7
4. Take out the hard disk tray, put an HDD inside the tray, and fasten the disk to the tray using
the included screws.
Repeat this step for all the HDDs that you want to install.
5. Slide the tray into a disk slot along the rails of the disk slot. Note that you must keep the
cover on the front panel of the tray open.
7. Push and hold the slider up to install the protection mask back to the device.
8. Release the slider.
9. Slide the included key into the lock on the front panel of the device and turn the key
counterclockwise to lock the slider.
Repeat this step for all the HDDs that you want to install.
6. Press the cover on the front panel of the tray until you hear a click indicating that the tray is
locked into the disk slot.