Kedacom NVR2881-16016B/16HI, Руководство по установке

Страница: 11 / 16

9
Rack tray
【 Note 】
You can connect the device to other devices (for example, a speaker). However, this
document does not provide the corresponding details. If you are experiencing trouble
connecting the device to other devices, contact us.
2. Choose a suitable location for the rack that is near a grounded power outlet.
Ensure that the rack is at least 0.6 m far away from the wall.
Leave at least 1.5 m of space in the front of the device.
3. Install the chassis provided by the rack manufacturer.
4. Place the device on the rack tray.
5. Fasten the hangers on the left and right sides of the device to the rack with screws provided
by the rack manufacturer through the four holes in the hangers.
6. Connect the ground wire to the ground bolt of the device.
7. Connect a network port to a network.
Depending on onsite conditions, connect the other network ports to the network. If all
network ports are in use, ensure that each of them is located on a unique network segment.
You are advised to use RJ-45 network cables.
8. Connect the device to a display that provides an HDMI and/or VGA port.
9. Connect the power cable to a power outlet.