Kedacom NVR2860E, Руководство по установке

Страница: 15 / 24

1 . 4 EMI
2 Unpacking
Follow the following steps to unpack the system:
1) Inspect the package to make sure that it has not been damaged
.
If you find damage, contact the local authorized Kedacom agent.
2) Open the package and check whether any item on the packing list is missing.
3)Take all items out of the package and check whether any item is in poor condition
.
If you find damage, contact the local authorized Kedacom agent.
3 Installing Disks
The NVR2860E can be mounted on a 19-inch rack and it is 2U high. Before mounting the
NVR2860E on a 19-inch rack, you must install disks.
If you do not want to install a disk
:
You cannot use the recording function
.
When the NVR2860E starts operating and detects that no disk is installed, the beeper will go
off and an alarm will be generated. To clear the alarm, on the OSD of the NVR, choose Main
Menu > Alarm > Active Alarm , and then select the alarm and click Clear .
To shield electromagnetic interference (EMI), you should observe the following guidelines:
Keep the ground system of the NVR2860E away from that of the power supply system
or
lightning protection system
.
Place the NVR2860E away from high-frequency devices, such as radio or radar stations.
When necessary, deploy EMI shielding devices.
To install a disk:
1. Slide the included key into the keyway of the lock on the front panel of the
NVR2860E and
turn the key clockwise to unlock the slider.
4