Kedacom NVR2820, Руководство пользователя

Страница: 56 / 58

Question and Answer
51
11 Question and Answer
1)
How to set system time?
Select Main Menu Æ System Æ General. Set the system time in the System
Time field. By default, the time set here will be synchronized with the time
in the synchronous surveillance system.
2)
How to set camera id?
When the device is accessed to the network, the NVR system will allocates
an id to the cameras in a unified manner by default. Once the id is
generated, it keeps unchanged, so the user does not need to make any
setting.
3)
Can we conduct disk management operation during recording, and how?
During recording, you may check partition error, but cannot format the
partition. Disk partition formatting should be made after the recording is
stopped. If you want to format immediately, please stop recording first and
then format.
4)
After press the key on the remote control to turn off the device, can I
directly turn off the power supply on the rear panel of the NVR?
Correct turn-off: Press the key on the remote control twice. After the
video output is turned off, press the power switch on the rear panel of the
NVR.
5)
Why the NVR Station cannot view videos while the surveillance system is working
normally?