Kedacom NVR1828, Руководство по установке

Страница: 22 / 28

To power off the device, click the related button on the OSD of the device.
To power on the device, cut power from the device by removing the power cable from the
power outlet, wait for at least 15 seconds, and feed power to the device again.
For details on how to use the device, see the user guide inlcuded in the KEDACOM
Document and Utility CD.
After the device is powered on, check whether the indicators on the front panel are normal. If
not, contact the local authorized Kedacom agent.
After the installation and cabling, please note the following.
9
Typical Network Topology
Camera
NVR
Monitor
NVR Station Web
NVR Station
Network
Connect the ground wire to the ground bolt of the device.
Connect the LAN network port to the Internet.
You are advised to use an RJ-45 network cable.
Connect the device to a display that provides an HDMI and/or VGA port.
(Optional) Wire cameras to the device using PoE ports.
Feed power to the device by connecting it to a power outlet using a power cable.
As for the cabling: