Kedacom NVR1828, Руководство по установке

Страница: 20 / 28

3.
4.
Use the screwdriver to remove the cover of the device by unscrewing screws on its bottom.
There are six screws for the NVR1828 and four for the NVR1829.
Put the HDD inside the device with four holes on the HDD aligned to the four holes on the
bottom of the device.
Put the HDD inside
the device.
Align the HDD.
1
2
7
Hold the HDD and device tight and turn them over to tighten the four screws back to the
HDD. 5.
Tighten the screws of the HDD.
Turn them over again and connect the HDD to the device using a SATA power cable and a
SATA data cable.
(Optional) Install a second HDD for the NVR1828 by repeating steps 1 through 6 except 3.
Before installing the cover back to the device, ensure that no dust or particle is left inside
the device.
Install the cover back to the device. 6.
7.
8.
9.