Access Control System User Manual
1) Input SMTP server IP address and port number, which ranges 1 ~ 65535,
25 by default;
2) Input "Sender" and "Sender Address"; optionally select "Server
Authentication" and input correct user name and password;
3) Input email topic; optionally select "Attachment" and choose attached file
format, then the email sent will attach the relative file;
4) Add receiver email address. Input the receiver's email address and click
the symbol "+" behind it and the address will be saved to the list below.
Select an address from the list and click the symbol "-" to remove the
email address;
5) Click "
Save
" to validate setting.
Note: This function is available only when email notification is enabled. Method to enable
email notification can be referred to in the chapter of
Intelligent Function
.
3.4
Camera
Go to
Settings > Camera
to configure camera parameters, including Image, OSD, Video,
Audio and PTZ interfaces.
3.4.1
Image
Go to Settings > Camera > Image, as shown below.
Picture 3-29 Image
