KED pop, Руководство пользователя

Страница: 16 / 24

16
Excessive temperatures or strong UV radiation can damage
your helmet. You should therefore not store your helmet above
60°C; a temperature which can be reached on the rear shelf of
a car for example. Do not place it directly onto or near a heat
source such as an oven. The helmet should simply be stored in
a dry place.
The helmet should be checked for visible defects at regular
intervals. Small scratches do not affect the protective effect
of your helmet.
Only use original parts for repairs. Please contact your retailer.
9. Safe use
This helmet is only suitable for cycling and roller skating.
It is not suitable for other sports such as skiing or driving mo-
torcycles and mopeds.
Before starting your trip, ensure the helmet is sitting properly
on your head. The latch system of the chinstrap must always
be fully closed. The straps must be tight. Please also check the
same for any children accompanying you.
The helmet must not be painted, varnished or adorned with
stickers! Paints, varnishes or stickers may contain components
that adversely affect the stability of the helmet and its protec-
tive effectiveness.
Do not make any changes to the helmet shell! Never drill into it
or screw objects into it.
In the event of a fall or a stronger impact, the protective effect
of the helmet shell can be severely impaired, even if no external
damage can be seen. You must therefore replace a helmet after
an accident and never use it again!
Depending on the intensity of use, a helmet should be replaced
after 3 to 5 years. The maximum service life without being
used is 8 years starting from the date of manufacture, which is
indicated in the helmet.
Please travel safely when wearing the helmet and do not
undertake any unnecessary risks.
DO NOT TRAVEL FAST – YOU MAY INJURE YOURSELF!
The protection offered by a helmet depends on the circum-
stances of the accident; wearing a protective helmet cannot
always prevent a fatal accident or prolonged disablement.
GB