8 130903
V1.1
●Operation Precautions:
a
、
Please read the safety instructions carefully, choose desirable work area for fear causing danger.
b
、
The probe is flexible to help you operate in hard-to–reach areas. Please don’t insert or bend by force..
Please do not over bend any part of the probe. Normally, the bending radius should more than 5cm to prevent
from causing permanent damage to the probe.
c
、
Don’t use the probe or camera head to modify surroundings, clear pathways or clogged areas. It couldn’t
be used as a fishing rod or tape.
d
、
The hand-held display unit is not waterproof .The camera head and its cover are waterproof, but not
acid-proof or fireproof. Don’t touch with these materials or they will ruin the camera head’s protective plastic.
Avoid submersing the camera head into corrosive, oily places or high-temperature objects.
e
、
Don’t place the inspection into anything or anywhere that may contain a live electrical charge. Please
check following methods to avoid injury.
For walls:
For inspecting the inside walls, be sure to shut off the circuit breaker to the whole house
before using the tool.
For pipes:
If you suspect a metal pipe could contain an electrical charge, have a qualified electrician
to check the pipe before using. A ground circuit, in some cases, can be returned to the cast
aluminium pipes and cause them to be charged.
For automobiles
：
Be sure the automobile is not running during inspection. Metal and liquid under the hood
may be hot. Don’t get oil or gas on the imager head.
Operation Notes
●Please don’t operate this product unless the manual has been read and proper training has been completely.
●The red LED will on when low battery of the inside battery of grip; The “
”displays if low battery of
screen.
●Don’t immerse the grip inspection into water, which will result in electric shock and damage.
●Only while the product is assembled well, the camera head is water-proof, but the grip and the screen isn’t
water-proof.
●Don’t use the product if white dew forms inside the camera head.
●If the tool couldn’t work well after turning it on. Please stop use and have the unit checked by a
qualified technician.
●Store idle product out of reach of children and other untrained persons. The tool is dangerous in the hands of
untrained users.
●Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect the
tools’ operation. If it is damaged, have the tools serviced before using. Many accidents are caused by poorly
maintained products.
